|
مهندسی مکانیک مدرس، جلد ۱۸، شماره ۲، صفحات ۳۵۹-۳۷۰
|
|
|
عنوان فارسی |
بازیابی انرژی گرمایی موجود در گاز خروجی از اگزوز یک موتور احتراق داخلی اشتعال جرقهای با استفاده از سیکل ترکیبی موتور استرلینگ |
|
چکیده فارسی مقاله |
در خودروهای سواری متداول حدود 40 درصد از انرژی سوخت به توان مفید تبدیل شده و بقیه توسط سیستم خنککاری و اگزوز به محیط هدایت میشود. لذا استفاده از یک سیکل تکمیلی در مسیر گازهای خروجی از اگزوز، یکی از روشیهای جذاب بازیابی انرژی میباشد. در این تحقیق از یک سیکل استرلینگ برای این منظور استفاده شد. در ابتدا، به شبیه سازی تکبعدی موتور احتراق داخلی جرقهای ای اف سون تنفس طبیعی پرداخته شد و برای صحه گذاری نتایج شبیه سازی، از نتایج تست تجربی آن استفاده شد. نتایج نشان داد دمای گازهای خروجی از اگزوز، بنا به شرایط عملکردی موتور، از393 تا 848 درجه سانتیگراد تغییر میکند، لذا با نصب بخش گرمکن موتور استرلینگ در مسیرگازهای خروجی از موتور میتوان این انرژی اتلافی را به کار مفید تبدیل کرد. برای صحه گذاری مدل تک بعدی موتور استرلینگ، از نتایج تجربی موتور استرلینگ سولو وی 161 استفاده شد. پس از صحه گذاری نتایج،. اقدام به شبیه سازی سیکل ترکیبی، برای سه فشار کاری 50، 60 و 70 بار موتور استرلینگ و در دورهای موتور 2000 تا 4500 دور بر دقیقه انجام شد. نتایج نشان داد که در فشار بهینه 50 بار برای موتور استرلینگ، شاهد افزایش توان 12.2 درصد و به طور میانگین 5.2 درصد در راندمان موتور ای اف سون بوده که این مقادیر بدون در نظر گرفتن وزن موتور استرلینگ اضافه شده به خودرو میباشد که با لحاظ نمودن آن، شاهد تاثیر نه چندان زیاد آن بر توان سیکل ترکیبی خواهیم بود. |
|
کلیدواژههای فارسی مقاله |
سیکل ترکیبی اتو-استرلینگ، سیستم بازیابی توان اتلافی، موتور احتراق داخلی جرقه ای، بازیافت انرژی گازهای اگزوز |
|
عنوان انگلیسی |
Recovery of exhaust waste heat for an ICE using a Stirling engine combined cycle |
|
چکیده انگلیسی مقاله |
In conventional internal combustion engines, about 40% of fuel energy is turned into useful power and the rest is driven by cooling and exhaust system out of the engine. Therefore, there is a ground to recover energy from this wasted energy by fixing an additional cycle inline with the exhaust gas outlet. In this research, a stirling cycle was used for this purpose. Initially, the internal combustion engine was simulated. The engine studied was an EF7-NA spark ignition internal combustion engine and the simulation results were validated by using experimental results. The results showed that the exhaust gas outlet temperature varies from 393 to 848 ° C, according to engine operating conditions. Therefore, by installing a Stirling engine heater inline with the exhaust gases from the EF7 engine, the wasted energy can be turned into useful work. To validate the results of one-dimensional Stirling engine simulation, the experimental results of the Stirling Solo V161 engine were used. After validating the Stirling engine model, the combined cycle was simulated, combining a Stirling engine at working pressure of 50, 60 and 70 bar and EF7 engine at engine speed of 2000 to 4500 rpm. The results showed that at an optimal pressure of 50 barfor the Stirling engine, the EF7 power gain was 12.2% and an average efficiency increase of 5.2%, regardless of the weight of the added stirling engine in the car which considering that, a low impact on the power of the combined cycle is expected. |
|
کلیدواژههای انگلیسی مقاله |
Otto-Stirling Combined Cycle, Waste power recovery system, Internal combustion engines spark ignition, Exhaust gas energy recovery |
|
نویسندگان مقاله |
علی نصیری طوسی | ali nassiri toosi دانشگاه علم و صنعت ایران سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)
صادق حسن پور | sadegh hasanpour iran university of science and technology دانشگاه علم و صنعت ایران سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)
|
|
نشانی اینترنتی |
http://journals.modares.ac.ir/browse.php?a_code=A-15-20544-2&slc_lang=fa&sid=15 |
فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
کد مقاله (doi) |
|
زبان مقاله منتشر شده |
fa |
موضوعات مقاله منتشر شده |
|
نوع مقاله منتشر شده |
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|