مهندسی مکانیک مدرس، جلد ۱۴، شماره ۱۱، صفحات ۱۹۵-۲۰۳

عنوان فارسی مطالعه عددی جوشش جریانی مادون‌سرد آب – Al۲O۳در کانال عمودی سینوسی
چکیده فارسی مقاله جوشش جریانی مادون‌سرد یکی از مسائل مهم در صنایعی همچون هسته‌ای و تولید نیرو است، زیرا با تحلیل آن اطلاعاتی در خصوص کسر حجمی بخار در روی دیواره و میزان شار حرارتی بحرانی به دست می‌آید. در کار حاضر تأثیر موجدار بودن کانال بر جوشش جریانی مادون‌سرد درون یک کانال قائم دو بعدی به صورت عددی بررسی شده و از روش حجم محدود و مدل دو سیالی برای مطالعه جریان استفاده شده است. نتایج بدست آمده نشان داد که با افرودن نانو ذرات به سیال پایه قطر متلاشی شدن حبابها و کسر حجمی بخار روی دیواره کاهش می‌یابد ولی دمای دیواره بدلیل کاهش شار حرارتی تبخیر افزایش پیدا می‌کند. همچنین با افزایش دامنه سینوسی، کسر حجمی بخار روی دیواره و دمای دیواره افزایش می‌یابد. به دلیل ثابت بودن مقدار مومنتم جریان در عرض کانال، با افزایش دمای آب روی دیواره چگالی آن کاهش یافته و سرعت سیال در نزدیکی دیواره¬ها افزایش یافته است. هم چنین به دلیل تغییرات سرعت ناشی از تغییرات سطح مقطع کانال و به دنبال آن کاهش فشار موضعی جریان، کسر حجمی بخار در نزدیکی گلوگاه¬ها افزایش می¬یابد.
کلیدواژه‌های فارسی مقاله جوشش مادون‌سرد،مدل دو سیالی،کانال سینوسی،نانوسیال

عنوان انگلیسی Numerical Study of Subcooled Flow Boiling of Water-Al2O3 in Vertical Sinusoidal Wavy Channel
چکیده انگلیسی مقاله Subcooled flow boiling has many industrial applications such as nuclear engineering and energy generation. The study of the subcooled flow boiling provides a lot of information about the void fraction of vapor on the wall and also the critical heat flux. In this paper, the sub cooled flow boiling in a 2D vertical corrugated channel has been investigated numerically. The two-fluid model and the finite volume method have been used in this investigation. The obtained results show that with increasing of nanoparticles in the base fluid, the void fraction and bubbles departure reduced, However, the wall temperature increases due to heat flux evaporation decreases. Also, with increasing the wavy amplitude, the wall temperature and void fraction increases. that increasing the water temperature on the wall decreases its density and the fluid velocity increases in the vicinity of the wall because the momentum of the flow is constant in the transverse cross section of the channel. Furthermore, because of the variations of the velocity due to the variations of the channel's cross section, the void fraction of the vapor increases in the converging areas of the corrugated channel.
کلیدواژه‌های انگلیسی مقاله Subcooled boiling,Two-fluid model,Sinusoidal wavy channel,nanofluid

نویسندگان مقاله محمد مهدی رشیدی | mohammad mehdi rashidi
استاد دانشکده مکانیک دانشگاه بوعلی سینا
سازمان اصلی تایید شده: دانشگاه بوعلی سینا (Bu ali sina university)

محمد نصیری | mohammad nasiri
دانشگاه تبریز-دانشکده فنی مهندسی مکانیک
سازمان اصلی تایید شده: دانشگاه تبریز (Tabriz university)


نشانی اینترنتی http://journals.modares.ac.ir/browse.php?a_code=A-15-1000-3861&slc_lang=fa&sid=15
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات