Showing 6 results for Damavandi
Volume 7, Issue 1 (3-2018)
Abstract
Acute toxicity of the field recommended concentration of three conventional insecticides (Diazinon, Malathion and Chlorpyrifos) and mineral oil was evaluated on 3rd and 4th instar larvae and adults of Cryptolaemus montrouzieri Mulsant. The mortalities caused by the insecticides and mineral oil were significantly different. Diazinon and Malathion with 100% mortality showed the highest toxicity to the different stages of the ladybird. Chlorpyrifos and mineral oil caused less than 30% mortality, while mineral oil had the lowest harmful effect on this predator. Based on LC50 and LC90 values 24h after treatment, the male and female adults of C. montrouzieri were more susceptible to Diazinon (701 and 635; 1257 and 1194ppm) than to Chlorpyrifos (4238 and 4316, 5683 and 5480 ppm). Based on International Organization of Biological Control (IOBC) classification, Chlorpyrifos and mineral oil were classified as category 1 (harmless) and Diazinon and Malathion were placed in category 4 (harmful).
Volume 8, Issue 2 (Spring 2020)
Abstract
Aims: Having a child with autism spectrum disorder can put a lot of stress and pressure on parents and affect their quality of life, as compared to parents of normal children. In this regard, the present study aimed to identify and determine the effectiveness of group cognitive behavioral counseling of the parents of children with autism spectrum disorder on their communication interactions with children.
Participants & Methods: Population consisted of mothers of children with autism spectrum disorder in the city of Shiraz, of which 40 eligible volunteers were selected using purposeful sampling method and were randomly divided into two groups of 20 (control and experiment) in the academic year of 2018-2019. Data collected using the Child-Parent Relationship Scale (CPRS; Pianta). Having completed the questionnaires by the target population, the experiment group received the intervention training program of group cognitive behavioral counseling for 10 one-hour sessions. However, the control group received no intervention training. Multi-variate covariance analysis and SPSS 22 were used to analyze data. The significance level was considered as 0.01.
Findings: The group cognitive behavioral counseling for mothers of children with autism spectrum disorder was effective on communication interaction with children and improved it (p= 0.001). Regarding the assessed effect, it should be noted that the degree of changes, according to eta coefficient (effect rate) was 23.3%.
Conclusion: According to the findings, group cognitive behavioral intervention method can be effective on improving parenting for children with autism spectrum disorder.
Volume 13, Issue 60 (0-0)
Abstract
Malting is one of the biotechnological processes that includes steeping, germination and killing of cereal in controlled environment in which hydrolytic enzymes are synthesized and cell wall, protein and starch of endosperm are largely digested. Purpose of this study was evaluation of malting quality and identification of suitable line for production of malt products. In this study, effect of malting processing on physicochemical properties including of kernel density, bulk density, thousand weight kernel, protein and cold water extract yield of EBYT and Yusuf varieties evaluated in complete randomized design plan. Experiments were made in triplicate. The results of ANOVA showed that sample type had significant effect on all physicochemical properties (p< 0.01). Maximum amount of kernel density (1332.33 kg/m3) and minimum amount of that (832.33 kg/m3) were related to barley seed of yusuf variety and obtained malt of yusuf variety, respectively. Malting process results in decrease of thousand weight kernel, kernel density and bulk density and increase of protein content and cold water extract yield. Cold water extract yield in obtained malt of EBYT line was higher than obtained malt of yusuf variety, and consequently, those utilities in enzymatic extracts preparation and also in confectionary, cake and cookie industries.
Esmaeil Damavandi, Salman Nourouzi, Sayed Mahmood Rabiee,
Volume 15, Issue 3 (5-2015)
Abstract
Presence of porosity and gas layers around the Al2O3 particles are one of the most important reasons of decreasing in mechanical properties of aluminum metal matrix composites. In this research, for decreasing of porosity, increasing of wettability and uniformly distribution of particles in matrix three method were used; using inert gas for injection powder with 5 liter/ min flow rate, particles heat treatment in 1100 ̊C for 20 min and mill Al2O3 particles with Al particles in ratio of Al / Al2O3= 1. The effect of these parameters on microstructure and mechanical properties of composite were investigated. The results showed that amount of porosity and agglomeration of particles were high in metal matrix composite with handy injection of particles. While injection with inert gas, using heat treatment and Al / Al2O3 milled Cause improve wettability and uniformly distribution of particles in molten Al. the results showed the maximum value of hardness , compression strength and impact energy have obtained in metal matrix composite reinforced with Al / Al2O3 milled with value of 78.7 BHN, 539.1 MPa and 8.2 Joule, respectively.
, A_sadeghi@Damavandiau.ac.ir,
Volume 21, Issue 1 (January 2021)
Abstract
| In this paper, the non-linear dynamic behavior of immersed AFM micro cantilever in liquid has been modeled. To increase the accuracy of the theoretical model, all necessary details for cantilever and sample surface have been taken into account. As for the theoretical model, the Timoshenko beam theory which takes the rotatory inertia and shear deformation effects into consideration has been adopted. For modeling the vibrational system, cantilever thickness, cantilever length and breadth, the angle between cantilever and sample surface, normal contact stiffness, lateral contact stiffness, tip height, breadth taper ratio, height taper ratio, time parameter and viscosity of the liquids have been considered. Differential quadrature method (DQM) has been used for solving the differential equations. During the investigation, the softening behavior was observed for all cases. Here, water, methanol, acetone and carbon tetrachloride has been supposed as immersion environments. Results show that increasing the liquid density reduces the resonant frequency. Time variable does not have any considerable effect on the non-linear resonant frequency. Theoretical modeling has been compared for a rectangular AFM cantilever with experimental works in both of the contact and non-contact modes in air and water environments. Results show good agreement. |
Volume 25, Issue 4 (5-2023)
Abstract
This study evaluated the quantitative and qualitative traits of 13 local summer squash populations. The experiment was carried out in a randomized block design with 3 replications for two years (2019 to 2020). The following traits were considered in this study: number, weight, length, width, and length/width ratio of fruits, seed yield, seed yield/fruit yield ratio, 1000 seeds weight, percentage of empty seeds, seed length, seed width, seed kernel/whole seed ratio, and seed oil percent. Also, quality tests were conducted including ease of separation of skin from the kernel, taste quality, and desirability of seed shape and size from the consumer's point of view. The analysis of variance showed significant differences in most of the studied traits. Based on the results of the mean comparison of traits, the highest seed yield was observed in Ghalami-Kalaleh#1 and Mashhady-Azadshahr and then Mashhady-Khoy populations. The highest taste quality from the consumer point of view belonged to the Goushti-Kalaleh population. The results represent a positive and highly significant correlation between seed yield and fruit number. No significant correlation was observed between seed yield and other related traits. It is recommended that fruit number trait be considered in selecting programs and modifying high-yielding populations.
