Mahdi Tahmaseiabdar, Gholam Hossein Liaghat, Hadi Shanazari, Amin Khodadadi, Homayoun Hadavinia, Abar Abotorabi,
Volume 15, Issue 9 (11-2015)
Abstract
Due to high hardness, low density and heat resistance, ceramics are widely used in armor applications and industry, thus, in this study, perforation process of projectile into ceramic targets is investigated analytically and numerically and a modified model is developed. In the analytical section, Woodward’s theory, one of the important theories in perforation process of projectile into ceramic targets, is investigated and some modifications are applied in Woodward’s model, hence the ballistic results of analytical method are improved and the modified model shows good agreement with the experimental results that in the analytical section, the modified model is based on Woodward’s model and modification of semi-angle of ceramic fracture cone, erosion, mushrooming and rigid from of projectile and also changes in yield strength of ceramic during perforation process, damage, are considered. In the numerical section, a finite element model is created using Ls-Dyna software and perforation process of projectile into Ceramic-Aluminum target is simulated. The results of the analytical method and numerical simulation are compared to the results of the other investigators and results of modified model show improvement in prediction of ballistic results.
Fatemeh Hassanpour Roudbeneh, Gholam Hossein Liaghat, Hadi Sabouri, Homayoun Hadavinia,
Volume 16, Issue 7 (9-2016)
Abstract
In this paper, the interaction between aluminum facing and honeycomb structure in the quasi-static and the impact loading has been investigated experimentally. The structural elements used in this research were aluminum plate, aluminum 5052 honeycomb structure. The quasi-static penetration tests and ballistic impact experiments were performed on aluminum plate, honeycomb structure and sandwich panel by flat ended penetrator and flat ended projectile respectively. The failure mechanisms, the ballistic limit velocities, the absorbed energies due to penetration, the damage modes and some structural responses were studied. Also, the effect of interaction between aluminum facing and honeycomb structure in the quasi-static penetration and the ballistic impact response in this honeycomb sandwich panel was discussed and commented upon. Comparing energy absorption in these structures showed that the amount of absorbed energy by the sandwich panel with honeycomb core is more than the absorbed energy by the aluminum plate and honeycomb structure in the quasi-static penetration. These results indicated, when the honeycomb structure was used as the core of sandwich panel, resulted in increasing of the stiffness and the strength of the sandwich panel. The ballistic impact results showed that the absorbed energy and the ballistic limit velocity in the sandwich panel compared with the individual components was increased. Therefor the sandwich structure can be used as a suitable energy absorber.
