Volume 23, Issue 10 (October 2023)
Modares Mechanical Engineering 2023, 23(10): 3-8 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Taheri M, Mohammadi M J. Sensitivity Analysis of Orthopedic Drilling Process Parameters Using Titanium Nitride Nanocoated Tools. Modares Mechanical Engineering 2023; 23 (10) :3-8
URL: http://mme.modares.ac.ir/article-15-72706-en.html
URL: http://mme.modares.ac.ir/article-15-72706-en.html
1- , M-taheri@araku.ac.ir
Abstract: (504 Views)
In orthopedics, the drilling process is one of the most important steps in the preparation of medical tools and implants. Improving the performance of medical tools and implants is of great importance, because these tools and implants are used in the repair of bone and joint injuries. One of the ways to improve the efficiency of these tools and implants is to use titanium nitride nano coatings on drilling tools. This article is presented with the aim of experimental analysis and optimization of axial force in the orthopedic drilling process using a tool coated with titanium nitride nano coating by physical deposition method. The purpose of this research is to improve the performance and efficiency of this process by optimizing various parameters such as tool rotation speed, cutting depth and titanium nitride coating. For this purpose, experimental tests were conducted using the response surface method. the sensitivity analysis was also performed. The results have shown that the rotational speed, as the most effective parameter, has a lesser effect (45% effect) on the axial force in the case without nanocoating, while it shows a greater effect (73% effect) in the case with nanocoating.
Article Type: Original Research |
Subject:
Machining
Received: 2023/12/1 | Accepted: 2022/10/2 | Published: 2022/10/2
Received: 2023/12/1 | Accepted: 2022/10/2 | Published: 2022/10/2
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |