Volume 23, Issue 10 (October 2023)
Modares Mechanical Engineering 2023, 23(10): 95-100 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Jafarian F, Fallah M M, Dehghani S. Investigating the Effect of Machining Parameters on Surface Roughness and Machining Force using Artificial Neural Network. Modares Mechanical Engineering 2023; 23 (10) :95-100
URL: http://mme.modares.ac.ir/article-15-72737-en.html
URL: http://mme.modares.ac.ir/article-15-72737-en.html
1- , Sajadmst94@gmail.com
Abstract: (411 Views)
When working with hardened materials, it's important to control and optimize the surface roughness and machining force. To achieve this, we can use intelligent methods that are based on prediction and optimization models. In this study, an artificial neural network was used to evaluate the surface roughness and machining force of hardened steel 4140 by analyzing cutting speed, feed rate, and machining time. A full factorial method was used to carry out 27 experiments, and an uncoated cemented carbide tool TCMW 16T304 H13A was used to measure surface roughness and machining force during turning. An artificial neural network model with two hidden layers was selected as the optimal architecture for separately predicting surface roughness and machining force. The predicted values were then compared with the experimental results, and the average error percentage for validation data was calculated as 4.25% for surface roughness and 5.11% for machining force. Finally, the optimal cutting parameters were selected to minimize surface roughness and machining force.
Article Type: Original Research |
Subject:
Machining
Received: 2023/12/2 | Accepted: 2023/10/2 | Published: 2023/10/2
Received: 2023/12/2 | Accepted: 2023/10/2 | Published: 2023/10/2
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |