Volume 14, Issue 8 (2014)                   Modares Mechanical Engineering 2014, 14(8): 68-74 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Zamani Nejad M, Rastgoo A, Hadi A. Onset yield analysis of rotating disks made of functionally graded materials using Tresca yield criterion. Modares Mechanical Engineering. 2014; 14 (8) :68-74
URL: http://mme.modares.ac.ir/article-15-11486-en.html
1- Assistant Professor of Yasouj University
2- Faculty Member
3- Master
Abstract:   (3499 Views)
This paper presents an elastic parametric analysis for the purpose of investigating the limit angular speed, displacement and stresses in rotating disks made of functionally graded materials (FGMs) based on Tresca yield criterion. The material properties obey the power law in radial direction. The Poisson’s ratio due to slight variations in engineering materials is assumed constant. For different values of inhomogeneity constant, limit angular speed, displacement and stresses in radial direction are plotted and for the commencement of the plastic flow, different states are investigated. state1: onset of plastic flow at the inner radius, state2: onset of plastic flow at the outer radius, state3: onset of plastic flow as the simultaneously at both radii and state4: onset of plastic flow between the inner and outer radii. To the best of the researchers’ knowledge, so far, in the papers which have been dealing with the investigation of onset yield analysis, the density and yield stress has been assumed constant; however, in this paper by assuming varying density and yield stress in rotating disks made of functionally graded materials and comparing results obtained by fixing these parameters, it has been observed that taking the density as a constant value is wrong and varying it has significant effects on the stresses.
Full-Text [PDF 501 kb]   (3457 Downloads)    
Article Type: Research Article | Subject: Stress Analysis
Received: 2014/02/14 | Accepted: 2014/03/9 | Published: 2014/09/17

Add your comments about this article : Your username or Email:
CAPTCHA