Volume 16, Issue 10 (1-2017)                   Modares Mechanical Engineering 2017, 16(10): 137-146 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Shanazari H, Lighat G H, Feli S. Analysis of penetration process in hybrid ceramic/nanocomposite targets. Modares Mechanical Engineering 2017; 16 (10) :137-146
URL: http://mme.modares.ac.ir/article-15-6319-en.html
Abstract:   (5065 Views)
In this paper, an analytical model has been developed for modeling high velocity impact on ceramic/nanocomposite targets. In this model, penetration resistance of ceramic is determined based on cavity expansion analysis and variables during perforation of projectile onto ceramic are considered. Also the force of ceramic-composite interface is modified. Ballistic performance of the ceramic/composite target is investigated with adding and dispersing of nano particles of zirconia (ZrO2) in the matrix of back up composite. Ballistic impact tests were performed to validate the analytical predictions. These tests were performed by firing 10 mm steel flat ended projectile onto ceramic/composite target. Front layer is alumina ceramic and composite laminates of back up made of E-glass/epoxy with and without nano-zirconia particle of 5 wt%. The effect of nano-zirconia dispersion in the matrix for different failure modes is discussed. Experimental results revealed an improvement in the ballistic performance of samples with nano-zirconia particle. The analytical predictions of ballistic limit velocity and residual velocity of projectile are found to be in good agreement with the experimental results.
Full-Text [PDF 4892 kb]   (6090 Downloads)    
Article Type: Research Article | Subject: Impact Mechanics
Received: 2016/06/29 | Accepted: 2016/09/5 | Published: 2016/10/9

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.