Volume 23, Issue 10 (October 2023)
Modares Mechanical Engineering 2023, 23(10): 15-19 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Taheri M, Ghane F. Investigating the Effect of Different Parameters on the Material Removal Rate in Magnetorheological Polishing. Modares Mechanical Engineering 2023; 23 (10) :15-19
URL: http://mme.modares.ac.ir/article-15-72709-en.html
URL: http://mme.modares.ac.ir/article-15-72709-en.html
1- , m-taheri@araku.ac.ir
Abstract: (724 Views)
Magnetorheological polishing is an optimized mechanism for accurate surface polishing. By using this structure change, the common problems of payment, such as creating the aggregate structure of abrasives, have been solved. In this regard, studying and checking process parameters will be a solution to increase efficiency and best performance. In this research, the parameters of magnetic pole rotation speed, workpiece rotation speed, turning radius, gap, and machining time have been investigated. Using the regression equation of the chipping rate, the parameters have been analyzed by a statistical sensitivity analysis using the Sobol method. The obtained results state that the rotation speed of the magnetic pole at 37% and the rotation speed of the workpiece at about 30% are considered the most effective parameters, and the turning radius at 15% and the machining gap at 16% are considered as the next parameters. Machining time is known to be the least influential parameter in this process by 1%. Based on this, the effect of time parameters on this process can be ignored.
Article Type: Original Research |
Subject:
Machining
Received: 2023/12/1 | Accepted: 2023/10/2 | Published: 2023/10/2
Received: 2023/12/1 | Accepted: 2023/10/2 | Published: 2023/10/2
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |