Volume 24, Issue 2 (February 2024)
Modares Mechanical Engineering 2024, 24(2): 87-95 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
yousefi jamalabad Y, rahimi J, Javadi Sigaroodi M R, Poursaeidi E, Montakhabi F. Characterization of hot corrosion performance and TGO behavior in APS-BC and HVOF-BC thermal barrier coatings. Modares Mechanical Engineering 2024; 24 (2) :87-95
URL: http://mme.modares.ac.ir/article-15-73738-en.html
URL: http://mme.modares.ac.ir/article-15-73738-en.html
Yousef Yousefi jamalabad1 
, Javad Rahimi1 , Mohammad Rasoul Javadi Sigaroodi1 , Esmaeil Poursaeidi * 2, Farzam Montakhabi1
, Javad Rahimi1 , Mohammad Rasoul Javadi Sigaroodi1 , Esmaeil Poursaeidi * 2, Farzam Montakhabi1
1- University of Zanjan
2- University of Zanjan ,epsaeidi@znu.ac.ir
2- University of Zanjan ,
Abstract: (1171 Views)
Hot corrosion and thermally grown oxide (TGO) formation are destructive factors in thermal barrier coatings (TBCs) that lead to coating failure under operational conditions. In the present study, the hot corrosion behavior and TGO evolution for TBCs whose Bond coat by deposited by atmospheric plasma spraying (APS) and high velocity oxygen fuel (HVOF) thermal spray methods were evaluated. Both types of coatings were subjected to cyclic hot corrosion testing at a temperature of 1100°C in the presence of molten salts of Na2SO4 and V2O5 under identical conditions. Subsequently, their microstructures were examined using scanning electron microscopy (SEM) and X-ray diffraction (XRD) images. Additionally, changes in TGO thickness were measured across different cycles using Image J software and SEM images. The results indicate that TBCs deposited using the HVOF method for the bond coat exhibit better performance compared to those deposited using the APS method. The results show that a phase change from tetragonal to monoclinic has occurred for zirconia with the penetration of corrosive salt melt and its reaction with the YSZ layer, and also with the depletion of yttria from the coating structure, YVO4 reaction products have been formed for TBCs. The endurance of hot corrosion cycle of TBCs and the growth behavior of TGO show that the coatings whose interface layer is applied by the HVOF method show better performance than the APS method.
Keywords: Hot Corrosion, Thermal Barrier Coatings, Atmospheric Plasma Spray, High Velocity Oxygen Fuel Thermal Spray.
Article Type: Original Research |
Subject:
Gas Turbine
Received: 2024/02/5 | Accepted: 2024/06/1 | Published: 2024/01/30
Received: 2024/02/5 | Accepted: 2024/06/1 | Published: 2024/01/30
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |