Volume 14, Issue 2 (5-2014)
Modares Mechanical Engineering 2014, 14(2): 19-26 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Azarang S, Baseri H. Experimental Study of the Magnetic Abrasive Deburring of Stainless Steel Drilled Parts. Modares Mechanical Engineering 2014; 14 (2) :19-26
URL: http://mme.modares.ac.ir/article-15-9118-en.html
URL: http://mme.modares.ac.ir/article-15-9118-en.html
Abstract: (8473 Views)
Drilling is the most widely used process for producing holes through the manufacturing parts. Drilling, as well as other machining processes, produce undesired raised material on both entrance and exit edges. The raised material caused by plastic flow is defined as burr, which is necessary to be removed for critical and precise part. In this work, magnetic abrasive deburring (MAD) was used to investigate the deburring performance of stainless steel. Firstly preliminary simulations were carried out by Maxwell software to determine appropriate MAD tool. Then, influence of MAD variables such as height of gap, mesh number and rotational speed were studied on burr height variation. Results indicated that mesh number of abrasive particles has the dominate effect in burr removal of stainless steel plate by this process.
Article Type: Research Article |
Subject:
Production Methods|Manufacturing Methods
Received: 2013/10/5 | Accepted: 2013/11/20 | Published: 2014/04/12
Received: 2013/10/5 | Accepted: 2013/11/20 | Published: 2014/04/12
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |