مهندسی مکانیک مدرس

مهندسی مکانیک مدرس

معرفی یک مدل آسایش حرارتی جدید برای ارزیابی احساس حرارتی موضعی و کلی در محیط‌های غیریکنواخت

نویسندگان
1 گروه تبدیل انرژی/دانشکده مکانیک/دانشگاه تربیت مدرس تهران
2 استاد دانشگاه تربیت مدرس
3 استادیار دانشگاه بیرجند
چکیده
مدل‌های استاندارد آسایش حرارتی همچون مدل فنگر و گایج و دیگر مدل‌های آسایش حرارتی متداول، برای محیط‌های یکنواخت توسعه پیدا کرده و آسایش حرارتی کلی برای بدن را بر مبنای عوامل فردی و محیطی متوسط پیش‌بینی می‌نمایند و توانایی ارزیابی آسایش حرارتی موضعی را ندارند. در حالی که در محیط‌های غیریکنواخت، بخش‌های مختلف بدن محدوده‌های مختلفی از پارامترهای فیزیکی از جمله دمای هوا، دمای متوسط تابش و سرعت هوا را تجربه می‌کنند. بنابراین واکنش افراد به محیط غیریکنواخت بستگی به احساس حرارتی موضعی بخش‌های مختلف بدن آنها دارد نه به احساس حرارتی کل بدن. در حال حاضر، ارزیابی آسایش حرارتی در محیط‌های غیریکنواخت، بیشتر به صورت آزمایش‌های کنترل شده در محیط‌های خاص مثل محیط داخل اتومبیل بوده و مدل‌های ارائه شده، بر اساس تحلیل رگرسیون نتایج تجربی استوار بوده است که مختص شرایط فردی و محیطی مطابق با آزمایش‌های انجام شده می‌باشند. هدف از این مقاله ارائه یک مدل آسایش حرارتی برای ارزیابی احساس حرارتی موضعی بخش‌های مختلف بدن و در نهایت ارزیابی احساس حرارتی کل بدن در محیط‌های غیریکنواخت می‌باشد. در مدل جدید، با استفاده از مدل فیزیولوژیکی و 16 بخشی تانابه، اثرات غیریکنواختی محیط لحاظ شده و دما و فرایندهای فیزیولوژیکی بخش‌های مختلف بدن محاسبه شده و سپس احساس حرارتی موضعی و کل بدن از طریق مدل دانشگاه برکلی ارزیابی می‌گردد. نتایج بدست آمده از مدل جدید با نتایج تجربی موجود مقایسه گردیده که حکایت از همخوانی مناسب نتایج بدست آمده با داده‌های آزمایشگاهی دارد.
کلیدواژه‌ها

عنوان مقاله English

Introducing a new thermal comfort model for evaluation of local and overall thermal sensation in non-uniform environments

نویسندگان English

negin moallemi khiavi 1
Mehdi Maerefat 2
Alireza Zolfaghari 3
1 department of mechanical engineering/tarbiat modares university of tehran
2 Prof. Mechanical Eng. Trabiat Modares Uiversity
3 mechanical engineering faculty/university of birjand
چکیده English

The standard and conventional thermal comfort models such as Gagge and Fangar models are only applicable in uniform thermal environments and predict the overall thermal sensation based on mean environmental and individual parameters and are not capable of evaluation of local thermal sensations of different body parts. But Under non-uniform conditions, the human body’s segments may experience a wide range of physical parameters such as air temperature, radiation temperature and air velocity. So the response of the people to non-uniform conditions depends on local thermal sensation not on overall thermal sensation. Nowadays, thermal comfort in non-uniform environments may be predicted using experiments in the climate chambers or in automobiles and the proposed models are based on the regression analysis of the experimental data from different subjects in special conditions. So the propose of this work is proposing a model for evaluation of local thermal sensation of different body segments and overall thermal sensation in non-uniform environments. In the new model, temperature and physiological mechanisms of different body parts are obtained by 16-segment Tanabe model and then the local and overall thermal sensations are evaluated by the University of Berkeley model. The comparison of obtained results by new model with available experimental data shows good agreement between them.

کلیدواژه‌ها English

Local Thermal Sensation
Overall Thermal Sensation
Non-Uniform Environments