مهندسی مکانیک مدرس

مهندسی مکانیک مدرس

تاثیر استفاده از گازهای مختلف در پنجره‌های چندجداره به‌منظور کاهش تلفات حرارتی ساختمان

نوع مقاله : پژوهشی اصیل

نویسندگان
گروه مهندسی مکانیک، دانشکده فنی مهندسی، مرکز آموزش عالی شهرضا، شهرضا، اصفهان، ایران
چکیده
یکی از دغدغه‌های اصلی جهان امروز، کاهش منابع انرژی و افزایش قیمت آن است. برای مقابله با این مساله اکثر کشورهای جهان به‌دنبال راه‌حل‌های جدید برای کم‌کردن نیاز به انرژی در زمینه‌های مختلف هستند. مصرف انرژی در ساختمان‌ها سهم قابل توجهی از مصرف انرژی سالیانه کشورها را به خود اختصاص می‌دهد. سالانه حدود 40% مصرف انرژی ایران صرف گرمایش، سرمایش و سایر نیازهای ساختمان‌ها می‌شود. لذا این بخش پتانسیل قابل توجهی برای اصلاح زیرساخت‌ها و کاهش مصرف انرژی را داراست. یکی از اجزای سازنده ساختمان‌ها که نقش قابل توجهی در هدررفت انرژی حرارتی دارد، پنجره است. با استفاده از پنجره‌های چندجداره پرشده با گازهای بی‌اثر می‌توان بخش زیادی از انرژی اتلافی ساختمان را کاهش داد. در این مقاله تاثیر استفاده از پنجره‌های چندجداره مختلف در کاهش تلفات حرارتی ساختمان بررسی شده است. تاثیر تعداد جداره شیشه در پنجره، نوع گاز بی‌اثر و ضخامت آن و همچنین نوع قاب در این مقاله مطالعه شده است. برای بررسی این عوامل، تلفات حرارتی یک ساختمان نمونه در نرم‌افزار Carrier شبیه‌سازی و محاسبه شده است. همچنین میزان شار هدایتی عبوری از پنجره‌های چندجداره با گازهای پرکننده مختلف به کمک نرم‌افزار FLUENT محاسبه شده است. براساس نتایج به‌دست‌آمده، پنجره سه‌جداره پرشده با گاز کریپتون بهترین عملکرد را در کاهش تلفات حرارتی ساختمان دارد و به‌کارگیری آن 66% عملکرد حرارتی پنجره تک‌جداره را بهبود می‌بخشد.
کلیدواژه‌ها

موضوعات


عنوان مقاله English

Effect of Using Different Gases in Multi-glazed Windows to Reduce Building Heat Losses

نویسندگان English

H. Bagheri-Esfe
M. Shahriar
Department of Mechanical Engineering, Faculty of Engineering, University of Shahreza, Shahreza, Isfahan, Iran
چکیده English

​One of the main concerns of the world today is of energy resources and rising prices. To counter this, most countries in the world are looking for new solutions to reduce the need for energy in various fields. Energy consumption in buildings has a significant share of the annual energy consumption of countries. About 40% of energy consumption of Iran is annually consumed in heating, cooling, and other building needs. Therefore, this sector has a significant potential for improving infrastructure and reducing energy consumption. One of the building components that plays a significant role in the loss of thermal energy is . Using multi-glazed windows filled with ideal gases, a lot of wasteful energy in the building can be reduced. In this paper, the effect of using different multi-glazed windows to reduce building heat losses has been investigated. Effect of number of layers, kind of ideal gas and its thickness, and also kind of frame in this paper. To investigate these factors, thermal losses of a typical building in the Carrier software. Also, heat flux passing through multi-glazed windows for different filling gases is calculated by Fluent software. Based on the results, three-glazed window with Krypton gas has the best performance in reducing heat loss of the building and its application improves thermal performance of a single-pane window up to 66%.

کلیدواژه‌ها English

Window of Building
Multi-glazed
Filling Gas
heat loss
Arıcı M, Karabay H. Determination of optimum thickness of double-glazed windows for the climatic regions of Turkey. Energy and Buildings. 2010;42(10):1773-1778. [Link] [DOI:10.1016/j.enbuild.2010.05.013]
Butkus J, Vladišauskas A, Jakevičius L. The use of ultrasound for investigation of glazing units. Ultragarsas. 2004;2(51):7-12. [Link]
UPVC CENTER. Specifications of double-glazed Windows [Internet]. Isfahan: UPVC Center; 2016 [cited November 10, 2018]. [Persian]. Available from: http://www.upvccenter.com/Article/1214 [Link]
Tian Ch, Chen T, Yang H, Chung TM. A generalized window energy rating system for typical office buildings. Solar Energy. 2010;84(7):1232-1243. [Link] [DOI:10.1016/j.solener.2010.03.030]
Karlsson J, Roos A. Evaluation of window energy rating models for different houses and European climates. Solar Energy. 2004;76(1-3):71-77. [Link] [DOI:10.1016/j.solener.2003.08.016]
Rijal HB, Tuohy P, Humphreys MA, Nicol JF, Samuel A, Clarke J. Using results from field surveys to predict the effect of open windows on thermal comfort and energy use in buildings. Energy and Buildings. 2007;39(7):823-836. [Link] [DOI:10.1016/j.enbuild.2007.02.003]
Banihashemi S, Golizadeh H, Hosseini MR, Shakouri M. Climatic, parametric and non-parametric analysis of energy performance of double-glazed windows in different climates. International Journal of Sustainable Built Environment. 2015;4(2):307-322. [Link] [DOI:10.1016/j.ijsbe.2015.09.002]
Aydin O. Determination of optimum air-layer thickness in double-pane windows. Energy and Buildings. 2000;32(3):303-308. [Link] [DOI:10.1016/S0378-7788(00)00057-8]
Arıcı M, Karabay H, Kan M. Flow and heat transfer in double, triple and quadruple pane windows. Energy and Buildings. 2015;86:394-402. [Link] [DOI:10.1016/j.enbuild.2014.10.043]
Carlos JS, Corvacho H, Silva PD, Castro-Gomes JP. Modelling and simulation of a ventilated double window. Applied Thermal Engineering. 2011;31(1):93-102. [Link] [DOI:10.1016/j.applthermaleng.2010.08.021]
Chow TT, Li Ch, Lin Z. Thermal characteristics of water-flow double-pane window. International Journal of Thermal Sciences. 2011;50(2):140-148. [Link] [DOI:10.1016/j.ijthermalsci.2010.10.006]
Dalal R, Naylor D, Roeleveld D. A CFD study of convection in a double glazed window with an enclosed pleated blind. Energy and Buildings. 2009;41(11):1256-1262. [Link] [DOI:10.1016/j.enbuild.2009.07.024]
De Giorgi L, Bertola V, Cafaro E. Thermal convection in double glazed windows with structured gap. Energy and Buildings. 2011;43(8):2034-2038. [Link] [DOI:10.1016/j.enbuild.2011.03.043]
Avedissian T, Naylor D. Free convective heat transfer in an enclosure with an internal louvered blind. International Journal of Heat and Mass Transfer. 2008;51(1-2):283-293. [Link] [DOI:10.1016/j.ijheatmasstransfer.2007.03.042]
Hanby VI, Cook MJ, Infield DG, Ji Y, Loveday DL, Mei L, et al. Nodal network and CFD simulation of airflow and heat transfer in double skin facades with blinds. Building Services Engineering Research and Technology. 2008;29(1):45-59. [Link] [DOI:10.1177/01436244080290010401]
Weir G, Muneer T. Energy and environmental impact analysis of double-glazed windows. Energy Conversion and Management. 1998;39(3-4):243-256. [Link] [DOI:10.1016/S0196-8904(96)00191-4]
Goia F, Perino M, Haase M. A numerical model to evaluate the thermal behaviour of PCM glazing system configurations. Energy and Buildings. 2012;54:141-153. [Link] [DOI:10.1016/j.enbuild.2012.07.036]
Buratti C, Moretti E. Glazing systems with silica aerogel for energy savings in buildings. Applied Energy. 2012;98:396-403. [Link] [DOI:10.1016/j.apenergy.2012.03.062]
Buratti C, Moretti E. Experimental performance evaluation of aerogel glazing systems. Applied Energy. 2012;97:430-437. [Link] [DOI:10.1016/j.apenergy.2011.12.055]
Aguilar JO, Xamán J, Olazo-Gómez Y, Hernández-López I, Becerra G, Jaramillo OA. Thermal performance of a room with a double glazing window using glazing available in Mexican market. Applied Thermal Engineering. 2017;119:505-515. [Link] [DOI:10.1016/j.applthermaleng.2017.03.083]
Tabatabaei M. Calculations of building facilities. 7th Edition. Tehran: Roozbahan; 2002. [Persian] [Link]
Vakiloroaya V. Design of air-conditioning systems using Carrier v4.5. 1th Edition. Tehran: Sanei; 2011. [Persian] [Link]