مهندسی مکانیک مدرس

مهندسی مکانیک مدرس

مطالعه تجربی تاثیر پارامترهای هندسی و الکتریکی در مشخصه های جریان یونی القایی توسط عملگرهای پلاسمایی

نویسندگان
1 پژوهشگاه هوافضا-عضو هیئت علمی
2 دانشیار دانشگاه صنعتی خواجه نصیر
چکیده
این مقاله به اندازه گیری تجربی سرعت لحظه ای باد یونی تولید شده توسط عملگر پلاسمایی تخلیه سد دی الکتریکی(DBD) در محیط هوای ساکن با فشار اتمسفریک می پردازد. یک مطالعه پارامتریک برای افزایش سرعت باد یونی القایی توسط عملگر DBD انجام شده است. مشخصات الکتریکی و مکانیکی این عملگر در شرایط مختلف مطالعه شده است. هدف اصلی این کار کمک به بهینه سازی پارامترهای هندسی و الکتریکی برای فراهم کردن باد یونی موثرتر در کنترل جریان می باشد. پروفیلهای سرعت متوسط باد یونی القایی نشان می دهد که با افزایش فرکانس تحریک موقعیت سرعت ماکزیمم به سطح نزدیکتر می شود. همچنین نتایج ما بیان می دارند که عملگرهای پلاسمایی DBD گردابه هایی در همان فرکانس تحریک ولتاژ اعمال شده تولید می کنند. با افزایش درصد سیکل کاری، قدرت گردابه های شسته شده از عملگرها نیز افزایش می یابد. بر خلاف کارهای مشابه در این زمینه، این مطالعه رفتار غیردائمی موج ورودی به عملگر پلاسمایی را مورد بررسی قرار می دهد.
کلیدواژه‌ها

عنوان مقاله English

Experimental Investigation of Geometric and Electrical Characteristics by measurements of the induced flow velocity

نویسندگان English

seyyed arash seyyed shams taleghani 1
seyyed arash seyyed shams taleghani 1
چکیده English

This paper deals with experimental measurements of the instantaneous ionic wind velocity induced by Dielectric barrier discharge (DBD) plasma actuator in quiescent air at atmospheric pressure. A parametric study has been performed in order to increase the velocity of the ionic wind induced by the DBD actuators. The electrical and mechanical characteristics of the plasma actuator have been studied under different conditions. The main objective of this work was to help to optimize the geometrical and electrical parameters to obtain more effective ionic wind for flow control. The time averaged velocity profiles of the ionic wind show that the position of the maximum velocity come near the surface by increasing the excitation frequency. Our results indicate that the DBD plasma actuators generate vortices at the same frequency of the excitation frequency of the applied high voltage. The power, of the vortices that are shed from the actuators, increases by increasing duty cycle percentage. Unlike other similar works in this field, this study has examined the behavior of unsteady plasma actuator.

کلیدواژه‌ها English

Plasma Actuator
Excitation frequency
Duty Cycle
DBD
active control