مهندسی مکانیک مدرس

مهندسی مکانیک مدرس

مقایسه خواص مکانیکی بین نانومواد مرکب وینیل استر- خاک رس و وینیل استر-تیتان

نویسندگان
1 دانشگاه بیرجند
2 استادیار دانشگاه بیرجند
3 سازمان انرژی اتمی ایران
چکیده
در این مقاله مقادیر مختلف خاک رس و دی اکسید تیتانیم (تیتان) (1، 3 و 5 % وزنی رزین) به زمینه وینیل استر به‌وسیله همزن با انرژی بالا اضافه می‌شود. تاثیر این نانوذرات روی خواص مکانیکی (استحکام و مدول کششی، استحکام و مدول خمشی و چقرمگی شکست) بررسی می‌شود. به منظور بررسی تشکیل شدن نانوماده مرکب، آزمایش XRD و عکسبرداری به‌وسیله میکروسکوپ الکترونی عبوری (TEM) انجام می‌شود. آزمایش XRDنشان می‌دهد که لایه‌های خاک رس کاملاً از هم جدا شده و ساختار نانوماده مرکب اکسفولیت شده است. نتایج حاصل از آزمایشهای کشش، خمش و چقرمگی شکست نشان می‌دهد که پرکننده خاک رس نسبت به تیتان در بهبود خواص مکانیکی بهتر است. نمونه تقویت شده با 1 درصد خاک رس نسبت به بقیه نمونه‌ها دارای خواص مکانیکی بهتری است.
کلیدواژه‌ها

عنوان مقاله English

The Comparison of mechanical properties between vinyl ester-titan and vinyl ester-clay nanocomposites

نویسندگان English

hamzeh shahrajabian 1
Seyed Yousef Ahmadi-Brooghani 2
javad ahmadi 3
چکیده English

In this study, various amounts of clay nanoparticles and titan nanoparticles (1, 3 and 5% wt.) were introduced into a vinyl ester resin matrix by high shear mixer. The influence of these nanoparticles on the mechanical properties (tensile strength, tensile modulus, flexural strength, flexural strength and fracture toughness) is investigated. To investigate the structure of nanocomposites, X-ray diffraction (XRD) and transmission electron microscopy (TEM) tests are done. The XRD test shows that the structure of clay-vinyl ester nanocomposites is exfoliated. The results of tensile, flexural and fracture toughness experiments show that clay is better than titan in the improvement of the mechanical properties. Clay- vinyl ester nanocomposite with 1% wt. of clay has the better mechanical properties than others samples.

کلیدواژه‌ها English

Nanocomposites
Vinyl ester
Clay
Titan