1. Sridharan S. Delamination behaviour of composites. 1st Edition. Cambridge: Woodhead Publishing Limited; 2008. [
Link] [
DOI:10.1533/9781845694821]
2. Kassapoglou Ch. Modeling the effect of damage in composite structures: Simplified approaches. Hoboken: John Wiley & Sons; 2015. [
Link] [
DOI:10.1002/9781119013228]
3. Knop A, Pilato LA. Phenolic resins: Chemistry, applications and performance: Future directions. Berlin: Springer; 1985. [
Link] [
DOI:10.1007/978-3-662-02429-4]
4. Rahimi A. Introducing polymers and application. 1st Edition. Tehran: Iran Polymer and Petrochemical Institute; 2006. [Persian] [
Link]
5. Zohurian Mehr MJ. Applied polymer chemistry. Tehran: Sharif University of Technology; 1997. [Persian] [
Link]
6. Beheshty M, Rezadoust AM. Plastic reinforced (composites). Tehran: Iran Polymer and Petrochemical Institute; 2012. [Persian] [
Link]
7. Akhlaghi R, Bahramian AR, Razaghi Kashani M. The effect of graphite nanoparticles on thermal stability and ablation of phenolic/carbon fiber/graphite nanocomposites. Iranian Journal of Polymer Science and Technology. 2014;27(3):241-249. [Persian] [
Link]
8. Pilato L, editor. Phenolic resins: A century of progress. Berlin: Springer; 2010. [
Link] [
DOI:10.1007/978-3-642-04714-5]
9. Karami Ghahi M, Beheshty MH, Esfandeh M, Rezadoust AM. Study of room temperature curing of phenolic resin and its silica reinforced composites. Iranian Journal of Polymer Science and Technology. 2008;21(2):149-155. [Persian] [
Link]
10. Minges ML. Thermal physical characteristics of high-performance ablative composites. Journal of Macromolecular Science: Part A- Chemistry. 1969;3(4):613-639. [
Link] [
DOI:10.1080/10601326908053832]
11. Gültek A, Seçkin T, Önal Y, İçduygu MG. Poly (methacrylic) acid andgamma-methacryloxypropyltrimethoxy silane/clay nanocomposites prepared by in-situ polymerization. Turkish Journal of Chemistry. 2002;26(6):925-938. [
Link]
12. Alexandre M, Dubois P. Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials. Materials Science and Engineering: R: Reports. 2000;28(1-2):1-63. [
Link] [
DOI:10.1016/S0927-796X(00)00012-7]
13. Zhu J, Start P, Mauritz KA, Wilkie CA. Thermal stability and flame retardancy of poly (methyl methacrylate)-clay nanocomposites. Polymer Degradation and Stability. 2002;77(2):253-258. [
Link] [
DOI:10.1016/S0141-3910(02)00056-3]
14. Chang JP, Lin YS, Chu K. Rapid thermal chemical vapor deposition of zirconium oxide for metal-oxide-semiconductor field effect transistor application. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena. 2001;19(5):1782-1787. [
Link] [
DOI:10.1116/1.1396639]
15. Kucuk A, Lima RS, Berndt CC. Influence of plasma spray parameters on formation and morphology of ZrO2-8 wt% Y2O3 deposits. Journal of the American Ceramic Society. 2001;84(4):693-700. [
Link] [
DOI:10.1111/j.1151-2916.2001.tb00728.x]
16. Matsumoto A, Ohtsuka K, Kimura H, Adachi SI, Takenaka M. Moldability and properties of phenolic/artificial zeolite composites. Journal of Applied Polymer Science. 2007;106(6):3666-3673. [
Link] [
DOI:10.1002/app.27041]
17. Bahramian AR, Kokabi M, Famili MH, Beheshty MH. High temperature ablation of kaolinite layered silicate/phenolic resin/asbestos cloth nanocomposite. Journal of Hazardous Materials. 2008;150(1):136-145. [
Link] [
DOI:10.1016/j.jhazmat.2007.04.104]
18. Bahramian AR, Kokabi M. Ablation mechanism of polymer layered silicate nanocomposite heat shield. Journal of Hazardous Materials. 2009;166(1):445-454. [
Link] [
DOI:10.1016/j.jhazmat.2008.11.061]
19. Bahramian AR, Kokabi M, Famili MH, Beheshty MH. Ablation and thermal degradation behaviour of a composite based on resol type phenolic resin: Process modeling and experimental. Polymer. 2006;47(10):3661-3673. [
Link] [
DOI:10.1016/j.polymer.2006.03.049]
20. Mirzapour A, Pourhasan B, Eslami Z. Effect of nanosilica on bending strength and thermal stability of glass fiber/phenolic nanocomposite. Iranian Journal of Polymer Science and Technology. 2016;29(4):377-386. [Persian] [
Link]
21. ASTM D3531/D3531M-16. Standard test method for resin flow of carbon fiber-epoxy prepreg. West Conshohocken: ASTM International; 2016. [
Link]
22. ASTM D3418-99. Standard test method for transition temperatures of polymers by differential scanning calorimetry. West Conshohocken: ASTM International; 1999. [
Link]
23. ASTMD790-17. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. West Conshohocken: ASTM International; 2017. [
Link]
24. ASTM D3039M. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken: ASTM International; 2017. [
Link]
25. Hitachi. DSC measurements of thermosetting resins. Tokyo: Hitachi; 1981. [
Link]
26. Pilato L, editor. Phenolic resins: A century of progress. 2nd Edition. Berlin: Springer Science & Business Media; 2010. [
Link] [
DOI:10.1007/978-3-642-04714-5]
27. Srebrenkoska V, Bogoeva-Gaceva G, Dimeski D. Composite material based on an ablative phenolic resin and carbon fibers. Journal of the Serbian Chemical Society. 2009;74(4):441-453. [
Link] [
DOI:10.2298/JSC0904441S]
28. Taherian R, Nozad Golikand A, Hadianfard MJ. Preparation and properties of a phenolic/graphite nanocomposite bipolar plate for proton exchange membrane fuel cell. ECS Journal of Solid State Science and Technology. 2012;1(6):M39-M46. [
Link] [
DOI:10.1149/2.005206jss]
29. Li M, Liu D. Mechanical and electrical properties of graphite/carbon fiber/phenolic resin composite. In: Fan W, editor. Advanced materials research. Unknown city: Trans Tech Publications. 2012. pp. 1452-1455. [
Link] [
DOI:10.4028/www.scientific.net/AMR.418-420.1452]