Volume 23, Issue 5 (May 2023)
Modares Mechanical Engineering 2023, 23(5): 317-322 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mahboubkhah M, Tayyari M. Calibration and error compensation of a 4-DOF milling machine with parallel mechanism. Modares Mechanical Engineering 2023; 23 (5) :317-322
URL: http://mme.modares.ac.ir/article-15-67954-en.html
URL: http://mme.modares.ac.ir/article-15-67954-en.html
1- University of Tabriz , mahboobkhah@tabrizu.ac.ir
2- University of Tabriz
2- University of Tabriz
Abstract: (1171 Views)
Employing machine tools with more than three degrees of freedom, is one of the effective methods for increasing the flexibility and accuracy of the machining parts. The milling machines with parallel mechanisms and higher degrees of freedom, have great stiffness and flexibility and also have great capability in the machining of the complicated parts. The calibration of this type of device, allows for increasing the accuracy and repeatability of the produced parts. In this article, a 4DOF milling machine with a parallel mechanism is introduced and necessary tests are performed to detect the movement errors of its rails. Again, the movement errors of the device have been measured by means of a dial indicator on a fixed part of the device using a magnetic base for positioning and linear movement of the device, and the measurement of errors after calibration has shown that the errors of the device have been significantly reduced. And it has increased the accuracy of the movement axes of the milling machine. Furthermore, the straightness of the axes is measured using a dial indicator and the error compensations are done. It is shown that the straightness of each axis with the adjustment of limit switches are improved very well.
Article Type: Original Research |
Subject:
Robotic
Received: 2023/03/8 | Accepted: 2023/04/17 | Published: 2023/04/30
Received: 2023/03/8 | Accepted: 2023/04/17 | Published: 2023/04/30
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |