Modares Mechanical Engineering

Modares Mechanical Engineering

Sensitivity Analysis of Orthopedic Drilling Process Parameters Using Titanium Nitride Nanocoated Tools

Document Type : Original Research

Authors
Moein Taheri
Mohammad Javad Mohammadi
10.22034/mme.23.10.3
Abstract
In orthopedics, the drilling process is one of the most important steps in the preparation of medical tools and implants. Improving the performance of medical tools and implants is of great importance, because these tools and implants are used in the repair of bone and joint injuries. One of the ways to improve the efficiency of these tools and implants is to use titanium nitride nano coatings on drilling tools. This article is presented with the aim of experimental analysis and optimization of axial force in the orthopedic drilling process using a tool coated with titanium nitride nano coating by physical deposition method. The purpose of this research is to improve the performance and efficiency of this process by optimizing various parameters such as tool rotation speed, cutting depth and titanium nitride coating. For this purpose, experimental tests were conducted using the response surface method. the sensitivity analysis was also performed. The results have shown that the rotational speed, as the most effective parameter, has a lesser effect (45% effect) on the axial force in the case without nanocoating, while it shows a greater effect (73% effect) in the case with nanocoating.
Keywords
Drilling
Orthopedics
Tool Nanocoating
Machining
Sensitivity Analysis

Subjects

1. Krebs FC. Fabrication and processing of polymer solar cells: A review of printing and coating techniques. Solar energy materials and solar cells. 2009; 93(4):394-412.
2. Wang J, Zhu J, Zhang Y, Liu J, Van der Bruggen B. Nanoscale tailor-made membranes for precise and rapid molecular sieve separation. Nanoscale. 2017; 9(9):2942-2957.
3. Javaid M, Haleem A. Impact of industry 4.0 to create advancements in orthopaedics. Journal of Clinical Orthopaedics and Trauma. 2020; 11:S491-S499.
4. Jakopec M, y Baena FR, Harris SJ, Gomes P, Cobb J, Davies BL. The hands-on orthopaedic robot" Acrobot": Early clinical trials of total knee replacement surgery. IEEE Transactions on Robotics and Automation. 2003; 19(5):902-911.
5. Dubey AK, Yadava V. Laser beam machining—A review. International Journal of Machine Tools and Manufacture. 2008; 48(6):609-628.
6. Rodríguez-Barrero S, Fernández-Larrinoa J, Azkona I, López de Lacalle LN, Polvorosa R. Enhanced performance of nanostructured coatings for drilling by droplet elimination. Materials and Manufacturing Processes. 2016;3 1(5):593-602.
7. Gupta K, Laubscher RF. Sustainable machining of titanium alloys: a critical review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2017; 231(14):2543-2560.
8. Mouche PA, Koyanagi T, Patel D, Katoh Y. Adhesion, structure, and mechanical properties of Cr HiPIMS and cathodic arc deposited coatings on SiC. Surface and Coatings Technology. 2021; 410:126939.
9. Dabees S, Mirzaei S, Kaspar P, Holcman V, Sobola D. Characterization and Evaluation of Engineered Coating Techniques for Different Cutting Tools. Materials. 2022; 15(16):5633.
10. Badr A. Creation of titanium oxynitride ceramic coating on metals for use in medicine. Journal of Iran's ceramic. 2020; 16(1):34-45 (in persian).
11. Lakshminarayanan AK, Balasubramanian V. Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique. Transactions of Nonferrous Metals Society of China. 2008; 18(3):548-554.
12. Zhu W, Fu H, Li F, Ji X, Li Y, Bai F. Optimization of CFRP drilling process: a review. The International Journal of Advanced Manufacturing Technology. 2022; 123(5-6):1403-1432.
13. Nikueimanesh A, Akbarzadeh S .Numerical and Experimental Investigation of Wear in Nanostructured Tin Coating on Steel Substrate. Modares Mechanical Engineering .2020; 20(1):149-155. (in persian).
14. Wu J, Ling C, Ge A, Jiang W, Baghaei S, Kolooshani A. Investigating the performance of tricalcium phosphate bioceramic reinforced with titanium nanoparticles in friction stir welding for coating of orthopedic prostheses application. Journal of Materials Research and Technology. 2022; 20:1685-1698.
15. Tahmasbi V, Pak A, Zeinolabedin Beygi A, HassanPour P. Experimental Analysis and Optimization of Thrust Force in the Orthopedic Drilling Process Using the Tool Coated with Titanium Nitride Nano Coating by the Physical Vapor Deposition Method. Iranian Journal of Manufacturing Engineering. 2022; 9(5):49-59. (in persian).
Modares Mechanical Engineering
Volume 23, Issue 10
October 2023
Pages 3-8