Modares Mechanical Engineering

Modares Mechanical Engineering

Experimental Crack Length Evaluation in a Gas Turbine Blade-Disc Connection Using Phased Array Ultrasonic Testing

Authors
Mohammadhossein Soorgee 1
Hossein Sahhaf Naeini 2
1 Faculty of Mechanical and Energy Engineering, Shahid Beheshti University, Tehran, Iran
2 Shahid Beheshti University
Abstract
Turbomachinery, specially gas turbines and axial compressors, play an important and vital role in energy producing and transmission industries. Thus, probable defects must be detected and measured in a timely manner, in order to prevent expensive costs of repair and maintenance. In this paper, a gas turbine blade-disc connection model, that is one of the most important and sensitive gas turbine parts, has been inspected using phased array ultrasonic non-destructive testing method. In manufactured mockup specimen, a crack with 4 and 8 millimeters length, has been created in two steps, followed by the length effect study on inspection results. Comparison of acquired signals in different angles for each crack length with acquired signals got from the healthy model in the same angles, has been employed for crack sizing purposes. The increase in the amplitude of crack reflected signals and the decrease in the amplitude of signals related to the wall behind the crack versus increase in the inspection angle, in ultrasonic phased array testing, has been utilized for extracting a novel feature for crack length estimation. Experimental results show that it is possible to evaluate the crack length in the complicated fir-tree geometry of the disc connection area to the blade, with the amount of error less than 10%, using the extracted feature.
Keywords
Ultrasonic Non-Destructive Testing
Phased Array
Gas Turbine
Blade-Disc Connection area

Subjects

[1] M. Tahan, E. Tsoutsanis, M. Muhammad, Z. A. Karim, Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review, Applied energy, Vol. 198, pp. 122-144, 2017.
[2] A. Chaibakhsh, S. Amirkhani, A Simulation Model for transient behaviour of Heavy-duty Gas Turbines, Applied Thermal Engineering, 2017.
[3] B.-S. Yang, V. T. Tran, An intelligent condition-based maintenance platform for rotating machinery, Expert Systems with Applications, Vol. 39, No. 3, pp. 2977-2988, 2012.
[4] S. Qu, C. Fu, C. Dong, J. Tian, Z. Zhang, Failure analysis of the 1st stage blades in gas turbine engine, Engineering Failure Analysis, Vol. 32, pp. 292-303, 2013.
[5] S. Rani, A. K. Agrawal, V. Rastogi, Failure investigations of a first stage Ni based super alloy gas turbine blade, in International Conference on Processing of Materials, Minerals and Energy, 2016.
[6] A. Kolagar, N. Tabrizi, M. Cheraghzadeh, M. Shahriari, Failure analysis of gas turbine first stage blade made of nickel-based superalloy, Case studies in engineering failure analysis, Vol. 8, pp. 61-68, 2017.
[7] Y.-W. Chen, G.-C. Tsai, The Crack of Turbine Blade Effect on the Dynamic Behavior of Turbine, Journal of Applied Mathematics and Physics, Vol. 2, No. 06, pp. 384, 2014.
[8] X. Yang, S. Chen, S. Jin, W. Chang, Crack orientation and depth estimation in a low-pressure turbine disc using a phased array ultrasonic transducer and an artificial neural network, Sensors, Vol. 13, No. 9, pp. 12375-12391, 2013.
[9] M. Nurbanasari, Abdurrachim, Crack of a first stage blade in a steam turbine, Case Studies in Engineering Failure Analysis, Vol. 2, No. 2, pp. 54-60, 2014.
[10] S. Yang, B. Yoon, Y. Kim, Using phased array ultrasonic technique for the inspection of straddle mount-type low-pressure turbine disc, Ndt & E International, Vol. 42, No. 2, pp. 128-132, 2009.
[11] Z. Bai, S. Chen, L. Jia, Z. Zeng, Phased array ultrasonic signal compressive detection in low-pressure turbine disc, NDT & E International, Vol. 89, pp. 1-13, 2017.
[12] L. Getsov, A. Semenov, I. Ignatovich, Thermal fatigue analysis of turbine discs on the base of deformation criterion, International Journal of Fatigue, Vol. 97, pp. 88-97, 2017.
[13] R. Mishra, J. Thomas, K. Srinivasan, V. Nandi, R. R. Bhatt, Failure analysis of an un-cooled turbine blade in an aero gas turbine engine, Engineering Failure Analysis, Vol. 79, pp. 836-844, 2017.
[14] D. E. Bray, R. K. Stanley, Nondestructive evaluation: a tool in design, manufacturing and service: CRC press, 1996.
[15] C. G. K. N. J Prasad, Non-Destructive Testing and Evaluation of Material: Tata McGraw-Hill Education, 2011.
[16] P. S. Firouzabadi, A. Najafi, Development Approaches of Ultrasonic and Eddy Current Non Destructive Inspection In Gas and Steam Turbine, Iranian Journal of Society of Mechanical Engineering, Vol. 26, No. 115, pp. 79-92, 2017. (in Persian فارسی)
[17] L. W. S. Jr., Fundametals of Ultrasonic Phased Arrays: Springer Cham Heidelberg New York Dordrecht London, 2015.
[18] N. Xu, Z. Zhou, Numerical simulation and experiment for inspection of corner-shaped components using ultrasonic phased array, NDT & E International, Vol. 63, pp. 28-34, 2014.
[19] S. Yareiee, M.-R. Sayyed Noorani, A. Ghanbari, Simulation of Waves Propagation via Linear Phased Array Probe with Improved Design (in Ultrasonic Inspection Tests), Modares Mechanical Engineering, Vol. 16, No. 6, pp. 353-361, 2016. (in Persian فارسی)
[20] Y. Hojjat, S. Ansari, M. R. Karafi, Present a procedure and fabrication of linear phased array ultrasonic for focusing waves in low frequency, Iranian Journal of Manufacturing Engineering, Vol. 2, No. 4, pp. 47-56, 2016. (in Persian فارسی)
[21] Y. Hojjat, S. Ansari, M. R. Karafi, Numerical study of the geometric parameters effect on acoustic pressure of focal point of a linear phased array ultrasonic transducer, Iranian Journal of Manufacturing Engineering, Vol. 3, No. 1, pp. 33-40, 2016. (in Persian فارسی)
[22] M. Asadizadeh, Gas Turbine Structure: Mapna Group Operation and Maintenance. (in Persian فارسی)
Modares Mechanical Engineering
Volume 18, Issue 9
December 2018
Pages 19-25