Hydraulic engine mounts isolate the structure of the vehicle from powertrain vibrations and also prevent excess motions of the powertrain due to shock excitations. In this paper, dynamic stiffness of a hydraulic engine mount in low frequency range (shock frequency range) is predicted using modal test data and three-dimensional finite element model through an iterative model updating procedure. The implemented model encompasses elastomeric material’s nonlinearity, fluid-structure-interaction and internal resonances of mount. Mesh morphing technique is used to model the fluid-structure-interaction. The results showed that the introduced procedure can successfully predict the shock isolation behaviour of the hydraulic engine mount.
Jahani,K. and Dehnad,M. (2014). Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction. Modares Mechanical Engineering, 14(4), 122-128.
MLA
Jahani,K. , and Dehnad,M. . "Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction", Modares Mechanical Engineering, 14, 4, 2014, 122-128.
HARVARD
Jahani K., Dehnad M. (2014). 'Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction', Modares Mechanical Engineering, 14(4), pp. 122-128.
CHICAGO
K. Jahani and M. Dehnad, "Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction," Modares Mechanical Engineering, 14 4 (2014): 122-128,
VANCOUVER
Jahani K., Dehnad M. Predicting the shock isolation behaviour of a hydraulic engine mount by 3D finite element modeling of fluid-structure-interaction. Modares Mechanical Engineering, 2014; 14(4): 122-128.
