Modares Mechanical Engineering

Modares Mechanical Engineering

Modelling and empirical investigation of micro-electro-mechanical piezo-resisitive pressure sensor based on the requirements of petrochemical industry

Authors
Navid SeyedKazem Viliani
Mehdi Hashemi
Hadi Vadizadeh
Hassan Pourrostami
Seyed Mohsen Mostafavi
Faramand Hashemizadeh
Abstract
This article presents analytical and empirical studies of a micro-electromechanical package. This micro-electro-mechanical (MEMS) pressure sensor package contains of a printed circuit board (PCB), the capacitance LCD. First of all, mathematical modeling and computer simulation using software COMSOL software which is based on finite element method are presented to compute the sensitivity of the MEMS pressure sensor and output voltage output. It is worth noting that an Xducer resistor type is adopted to measure the diaphragm deflection. In addition to static and modal analyses of the sensor, the effects of geometric parameters on the voltage has also been studied. Simulation results show that by changing the size and position of the resistor and also the size and thickness of the diaphragm, sensor sensitivity can be changed. Then, with the construction and placement of components on printed circuit boards, the package has been prepared and tested in a laboratory. The experimental results of the package show that the error of the devised system in measuring the pressure is less than 0.5 percent. This pressure sensor package is capable of accurately measuring the pressure up to 6 bar in which all the empirical results are presented at the end of the study. The package can be designed according to the requirements of the petrochemical industry in measuring gas pressure of storage tanks and drums in FANAVARN petrochemical company.
Keywords
MEMS Pressure sensor
Piezoresistive
Petrochemical industry
Analytical and empirical investigation
Modares Mechanical Engineering
Volume 14, Issue 16
March 2015
Pages 349-357