[1] S. R. Karnik, V. N. Gaitonde, J. C. Rubio, A. E. Correia, A. M. Abrão, and J. P. Davim, “Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model,” Mater. Des., vol. 29, no. 9, pp. 1768–1776, 2008,
doi: 10.1016/j.matdes.2008.03.014.
[2] W.-C. Chen, “Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates,” Int. J. Mach. Tools Manuf., vol. 37, no. 8, pp. 1097–1108, Aug. 1997,
doi: 10.1016/S0890-6955(96)00095-8.
[3] B. Latha, V. S. Senthilkumar, and K. Palanikumar, “Influence of drill geometry on thrust force in drilling GFRP composites,”
J. Reinf. Plast. Compos., vol. 30, no. 6, pp. 463–472, Mar. 2011,
doi: 10.1177/0731684411398520.
[4] O. Isbilir and E. Ghassemieh, “Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites,”
Compos. Struct., vol. 105, pp. 126–133, Nov. 2013,
doi: 10.1016/j.compstruct.2013.04.026.
[5] Rampal, G. Kumar, S. M. Rangappa, S. Siengchin, and S. Zafar, “A review of recent advancements in drilling of fiber-reinforced polymer composites,” Compos. Part C Open Access, vol. 9, p. 100312, Oct. 2022,
doi: 10.1016/j.jcomc.2022.100312.
[6] A. Ünüvar and O. Öztürk, “Machinability analysis of delamination and thrust force in drilling of pure and added GFRP composites,” J. Compos. Mater., vol. 57, no. 1, pp. 3–21, Jan. 2023,
doi: 10.1177/00219983221139423.
[7]
R. K. Thakur and K. K. Singh, “Evaluation of drilling characteristics to explore the effect of graphene nanoplatelets on glass fiber reinforced polymer composite,”
Measurement, vol. 219, p. 113233, Oct. 2023,
doi: 10.1016/j.measurement.2023.113233.
[8] V. Durga Prasada Rao, S. R. S. Mahaboob Ali, S. M. Z. Ali, and B. S. Santhoshi, “Analysis of delamination during drilling process of aramid fibre reinforced polymers,” Journal of Physics: Conference Series, vol. 2765, no. 1, Art. no. 012016, 2024,
doi: 10.1088/1742-6596/2765/1/012016.
[9] M. J. Khodaparast, R. Azarafza, and A. Vafaiesifat, “Experimental investigation and optimization of the effective parameters in the drilling process of glass fiber–epoxy composite parts,” Composite Science and Technology, vol. 8, no. 1, pp. 1411–1420, 2021. [Online]. Available:
https://sid.ir/paper/1034487/fa
[10] H. Razqimaleki, P. Parvandeh, and M. Hamedi, “A review of drilling of natural fiber-reinforced composites,” Journal of Mechanical Engineering, vol. 33, no. 6, pp. 58–71, 2025,
doi:
10.30506/mmep.2025.2034118.2182.
[11] S. Seifoori, A. Alibiglo, G. Liaghat, and M. Pol, “Explicit finite element modeling of impact loading on nanobeam to compare with Euler–Bernoulli and Timoshenko theory,”
Modares Mechanical Engineering, vol. 14, no. 13, pp. 259–268, 2015.
Dor :20.1001.1.10275940.1393.14.13.4.7.
[12]
S. Seifoori, A. M. Parrany, and S. Mirzarahmani, “Impact damage detection in CFRP and GFRP curved composite laminates subjected to low-velocity impacts,”
Compos. Struct., vol. 261, p. 113278, Apr. 2021,
doi: 10.1016/j.compstruct.2021.113278.
[13] S. Seifoori, R. Izadi, and A. R. Yazdinezhad, “Impact damage detection for small- and large-mass impacts on CFRP and GFRP composite laminates with different striker geometries using experimental, analytical and FE methods,”
Acta Mech., vol. 230, no. 12, pp. 4417–4433, Dec. 2019,
doi: 10.1007/s00707-019-02509-0.
[14] B. Arachchige and H. Ghasemnejad, “Post impact analysis of damaged variable-stiffness curved composite plates,”
Compos. Struct., vol. 166, pp. 12–21, Apr. 2017,
doi: 10.1016/j.compstruct.2017.01.018.
[15]
S. Seifoori and M. Hosseini, “Analytical and numerical study of composite plates under impact loading at low velocity with different strikers,”
Modares Mechanical Engineering, vol. 18, pp. 53–60, 2018.
dor: 20.1001.1.10275940.1397.18.2.25.4.
[16] S. Seifoori, G. H. Liaghat, and M. Foladi, “Low velocity impact on Timoshenko nanobeam using a nonlocal elasticity theory,”
Modares Mechanical Engineering, vol. 13, no. 8, pp. 151–160, 2013.
