Modares Mechanical Engineering

Modares Mechanical Engineering

Cross-Speed Generalization of Fan Imbalance Identification Using Machine Learning

Document Type : Original Article

Authors
Department of Mechanical Engineering, Petroleum University of Technology, Abadan, Iran
10.48311/mme.2026.122337.83068
Abstract
Condition monitoring of fans under variable-speed operation is challenging because changes in vibration characteristics can reduce the generalizability of machine-learning models. This study presents a machine-learning framework for identifying three fan imbalance configurations under previously unseen operating-speed conditions. A cross-speed evaluation strategy based on leave-one-speed-out validation was employed to provide a more realistic assessment of classifier robustness compared with conventional random data splitting. Four machine-learning models, including Logistic Regression, RBF-SVM, Random Forest, and Extra Trees, were evaluated using engineered features extracted from triaxial vibration measurements. In addition, predictive entropy and conformal prediction were incorporated to assess the reliability and uncertainty of model decisions. Extra Trees achieved the highest balanced accuracy under cross-speed validation, while uncertainty analysis demonstrated the ability of reliability metrics to identify ambiguous predictions and support selective decision-making. The results show that validation strategy strongly influences the estimated performance of vibration-based classifiers and that reliability-aware evaluation provides additional information beyond accuracy alone. The proposed framework provides a realistic assessment of cross-speed generalization for the investigated experimental benchmark; however, further validation using independent equipment, sensing configurations, and operating conditions is required before broader industrial conclusions can be drawn.
Keywords
Subjects

[1] A. K. S. Jardine, D. Lin, and D. Banjevic, “A review on machinery diagnostics and prognostics implementing condition-based maintenance,” Mechanical Systems and Signal Processing, vol. 20, no. 7, pp. 1483-1510, 2006. doi: 10.1016/j.ymssp.2005.09.012.
[2] R. Liu, B. Yang, E. Zio, and X. Chen, “Artificial intelligence for fault diagnosis of rotating machinery: A review,” Mechanical Systems and Signal Processing, vol. 108, pp. 33-47, 2018.                                       doi: 10.1016/j.ymssp.2018.02.016.
[3] O. Das, D. Bagci Das, and D. Birant, “Machine learning for fault analysis in rotating machinery: A comprehensive review,” Heliyon, vol. 9, no. 6, p. e17584, 2023. doi: 10.1016/j.heliyon.2023.e17584.
[4] R. Zhao, R. Yan, Z. Chen, K. Mao, P. Wang, and R. X. Gao, “Deep learning and its applications to machine health monitoring: A survey,” Mechanical Systems and Signal Processing, vol. 115, pp. 213-237, 2019. doi:10.1016/j.ymssp.2018.05.050.
[5] Y. Lei, B. Yang, X. Jiang, F. Jia, N. Li, and A. K. Nandi, “Applications of machine learning to machine fault diagnosis: A review and roadmap,” Mechanical Systems and Signal Processing, vol. 138, p. 106587, 2020. doi: j.ymssp.2019.106587.
[6] S. Zhang, S. Zhang, B. Wang, and T. G. Habetler, “Deep learning algorithms for bearing fault diagnostics—A comprehensive review,” IEEE Access, vol. 8, pp. 29857-29881, 2020.                                                      doi:10.1109/ACCESS.2020.2972859.
[7] M. Rao, M. J. Zuo, and Z. Tian, “A speed normalized autoencoder for rotating machinery fault detection under varying speed conditions,” Mechanical Systems and Signal Processing, vol. 189, p. 110109, 2023.doi: 10.1016/j.ymssp.2023.110109.
[8] T. Hastie, R. Tibshirani, and J. Friedman, The Elements of Statistical Learning: Data Mining, Inference, and Prediction, 2nd ed. Springer, 2009. doi: 10.1007/978-0-387-84858-7.
[9] L. Breiman, “Random forests,” Machine Learning, vol. 45, no. 1, pp. 5-32, 2001.doi:10.1023/A:1010933404324.
[10] P. Geurts, D. Ernst, and L. Wehenkel, “Extremely randomized trees,” Machine Learning, vol. 63, no. 1, pp. 3-42, 2006.                              doi:10.1007/s10994-006-6226-1.
[11] C. Cortes and V. Vapnik, “Support-vector networks,” Machine Learning, vol. 20, no. 3, pp. 273-297, 1995.                                                         doi:10.1007/BF00994018.
[12] S. Kapoor and A. Narayanan, “Leakage and the reproducibility crisis in machine-learning-based science,” Patterns, vol. 4, no. 9, p. 100804, 2023.doi:10.1016/j.patter.2023.100804
[13] G. S. Sampaio, A. R. de A. Vallim Filho, L. S. da Silva, and L. A. da Silva, “Prediction of motor failure time using an artificial neural network,” Sensors, vol. 19, no. 19, p. 4342, 2019.                                               doi:0.3390/s19194342.
[14] G. S. Sampaio, A. R. de A. Vallim Filho, L. S. da Silva, and L. A. da Silva, “Accelerometer,” UCI Machine Learning Repository, 2019. doi:10.24432/C5Q61V.
[15] A. N. Angelopoulos and S. Bates, “Conformal prediction: A gentle introduction,” Foundations and Trends in Machine Learning, vol. 16, no. 4, pp. 494-591, 2023                                                                                      doi:10.1561/2200000101.
[16] J. Ren, J. Wen, Z. Zhao, R. Yan, X. Chen, and A. K. Nandi, “Uncertainty-aware deep learning: A promising tool for trustworthy fault diagnosis,” IEEE/CAA Journal of Automatica Sinica, vol. 11, no. 6, pp. 1317-1330, 2024.                                                                                                   doi:10.1109/JAS.2024.124290.
[17] O. Mey, W. Neudeck, A. Schneider, and O. Enge-Rosenblatt, “Machine learning-based unbalance detection of a rotating shaft using vibration data,” arXiv preprint arXiv:2005.12742, 2020,                                    doi:10.48550/arXiv.2005.12742.
[18] R. M. Souza, E. G. S. Nascimento, U. A. Miranda, W. J. D. Silva, and H. A. Lepikson, “Deep learning for diagnosis and classification of faults in industrial rotating machinery,” Computers & Industrial Engineering, vol. 153, Art. no. 107060, 2021,                                                           doi:10.1016/j.cie.2020.107060.
[19] W. Zhang, G. Peng, C. Li, Y. Chen, and Z. Zhang, “A deep convolutional neural network with new training methods for bearing fault diagnosis under noisy environment and different working load,” Mechanical Systems and Signal Processing, vol. 100, pp. 439–453, 2018, doi:10.1016/j.ymssp.2017.06.022.
[20] J. Park, Y. Kim, K. Na, B. D. Youn, Y. Chen, M. J. Zuo, and Y.-C. Bae, “An image-based feature extraction method for fault diagnosis of variable-speed rotating machinery,” Mechanical Systems and Signal Processing, vol. 167, Art. no. 108524, 2022, doi:10.1016/j.ymssp.2021.108524.
[21] Z. Zhao, T. Li, J. Wu, C. Sun, S. Wang, R. Yan, and X. Chen, “Deep learning algorithms for rotating machinery intelligent diagnosis: An open source benchmark study,” arXiv preprint arXiv:2003.03315, 2020,                                                                                                doi:10.48550/arXiv.2003.03315.
[22] R. Jalayer, M. Jalayer, A. Mor, C. Orsenigo, and C. Vercellis, “Evaluating deep learning models for fault diagnosis of a rotating machinery with epistemic and aleatoric uncertainty,” arXiv preprint arXiv:2412.18980, 2024, doi: 10.48550/arXiv.2412.18980
[23] J. Demšar, “Statistical comparisons of classifiers over multiple data sets,” Journal of Machine Learning Research, vol. 7, pp. 1–30, 2006, doi:10.5555/1248547.1248548