Optimal design and fabrication of a 4-DOF quattrotaar parallel robot with singularity-free workspace by ABC and PSO algorithms

Zamani Fekri, Mehdi; Zarei, Mojtaba; Tale Masouleh, Mehdi; Yazdani, Mojtaba

Optimal design and fabrication of a 4-DOF quattrotaar parallel robot with singularity-free workspace by ABC and PSO algorithms

Authors

Mehdi Zamani Fekri

Mojtaba Zarei ¹

Mehdi Tale Masouleh ²

Mojtaba Yazdani ¹

¹ student

² prof.

Abstract

Simulation of the four degree of freedom parallel robot (Quattrotaar) is subjective of this paper. The mathematical model of the parallel robot is obtained too. The workspace is optimized for Non-singular kinematic type-2. Artificial Bees Colony algorithm and Particle Swarm Optimization algorithm as overall exploring algorithms are implemented and the results are compared to each other. Neglect of any intrinsic complexity of the optimization problem the results show the capability of both methods for this robot parameters design. Comparison of the results indicates the Particle Swarm Optimization algorithm runs faster than Artificial Bees Colony algorithm. The exploring volume consists of a plan with 500 mm x 500 mm dimension which moves in a vertical direction from 500 mm to 1000 mm. One of the important hints of the paper is a 90-degree rotation of end effector around vertical axis Z. This rotation is caused more flexibility and dexterity for the robot. A 3-D model of Quattrotaar parallel robot is created by Computer Aided Design software and finally, Quattrotaar is fabricated in Human and Robot Interaction Laboratory (Taarlab)

Keywords

Parallel Robot

singularity

Quattrotaar Robot

Artificial Bees colony

Particle Swarm Optimization