Modares Mechanical Engineering

Volume & Issue: Volume 16, Issue 5, July 2016

Number of Articles: 42

An investigation of the effect of microstructure on determination of acoustoelastic constants in austenitic stainless steel welding

Pages 1-9

Iman Rahimi, Shayan Nejadshamsi, Farzam Ghasimakbari, Mahdi Ahmad Najafabadi

Feedback-Feedforward Control System Design and Optimizing the Performance of Crude Oil Fired Heater Furnace Using Genetic Algorithm for Abnormal Conditions Management

Pages 10-18

Ali Chaibakhsh, Zohreh Rostamnezhad, Tahmineh Adili, Ali Jamali

Investigation of the inertia of the lateral motions effect on free axial vibration of nanorods using nonlocal Rayleigh theory

Pages 19-28

Reza Nazemnezhad, Kamran Kamali

Studying the effects of design parameters on the final topology of planar structures by improved bi-directional evolutionary structural optimization method

Pages 29-38

Saeed Shabani Nodehi, Seyed Reza Falahatgar, Reza Ansari

Experimental and numerical investigation of interlayer crack effects on the Free-vibration of corrugated-face sheet composite sandwich plates

Pages 39-50

Arash Naeimi_Abkenari, Mahdi Karimi

Experimental and Numeral Analysis of Composite metal Vessel under Dynamic Loading

Pages 51-62

Ali Asghar Masumi, Golam Hossein Rahimi, Golam Hossein Liyaghat

Input acoustic impedance measurement of Ney with Pulse reflectometry method

Pages 63-69

Ayoub Banoushi, Edris Mohammady Talvar, Mohsen Broghany

Investigation on effect of exhaust vents location on reduction of pollution in enclosed car parks

Pages 70-80

Javad Amnian, Mehdi Maerefat, Ghasem Heidarinejad

Investigating the Effect of single wall carbon nanotubes in the context of epoxy resin on the electromagnetic waves in the X-band

Pages 81-89

Rasoul Tarkesh esfahani, Seyyed Alireza Hashemi

Small scale effect on the dynamic pull-in instability of torsional nano-actuators using 2-DOF model

Pages 90-100

Soroosh Malihi, Yaghoub Tadi Bani

An Optimized Method for Upper-stage System design

Pages 101-110

Mehran Nosratollahi, Mostafa Zakeri, Alireza Novinzadeh

Investigation of the geometry effects on the thermo-hydrodynamic performance of noncircular journal bearings using GDQ method

Pages 111-122

Asghar Dashti Rahmatabadi, Abolfazl Rasoolizadeh Shooroki, Mahdi Zare Mehrjardi

Predicting the bending limit of AA8112 tubes using failure criterion in Hydro-Rotary draw bending process

Pages 123-134

Mehrdad Paluch, Majid Elyasi, Morteza Hoseinzadeh

Numerical optimization of âPlanar twist channel angular extrusionâ as a novel severe plastic deformation method by DOE method

Pages 135-144

Mahmoud Shamsborhan, Mahmoud Moradi, Ali Shokuhfar

Fracture analysis of a unidirectional composite double cantilever beam specimen with finite length

Pages 145-152

AmirReza Shahani, Razieh Abolfathitabar

Analytical approach to estimate supercavity length based on cavity and Reynolds numbers

Pages 153-159

Mehdi Maerefat, Sohrab Tahmasebi, Mohammad Reza Ansari

Determination of Pressure Path and Punch Velocity in Hydroforming of Cup-Shaped Products Using Adaptive Simulation-Based Optimization

Pages 160-168

S. M. Hossein Seyedkashi, Abbas Hashemi, Mohammad Hosseinpour

Simulation of film boiling heat transfer on flat plate and the impact of various phase change models on it

Pages 169-177

Seyed Amirreza Hosseini, Ramin Kouhikamali

Optimal Switching Times of Bang-Bang Controller for Uncertain Overhead Crane System

Pages 178-186

Mojtaba Masoumnezhad, Seyed Ali Moafi

Numerical analysis of blade flutter in low-pressure turbine

Pages 187-198

Amir Meshkati Shahmirzadi, Saeid Irani, Mojtaba Farrokh

A new analytical model to study heat transfer in Borehole heat exchangers in a short time periods

Pages 199-209

Mehdi Maerefat, Asgar Minaei

Study of formability of aluminum truncated pyramid in single-stage and two-stage incremental sheet forming

Pages 210-220

Amir Hossein Nikdooz, Mohammad Javad Mirnia, Hamid Baseri

The effect of secondary flows created by curved micromixers with various geometries on mixing of non-Newtonian fluids

Pages 221-230

Sima Baheri Islami, Marzieh khezerloo, Reza Gharraei

Object Orientation Detection Based on Machine Vision and Artificial Neural Network

Pages 231-240

Ehsan Moradi, Mehdi Tale Masouleh, Mohmmad Javad Najari

Design and fabrication of robotic gripper for robust grasping various objects in unstructured environments

Pages 241-250

Hamidreza Heidari, Milad Jafary Pouria, Shahriar Sharifi, Mahmoud Reza Karami

Application of Isogeometric Analysis and Charged System Search Algorithm in Structural Shape Optimization

Pages 251-260

Seyed Mehdi Tavakkoli, Seyedeh Sedigheh Mashmoul, Omid Khadem Hosseini

An algorithm for prediction of die geometry effects on strength behavior of sheets fabricated by groove pressing process

Pages 261-270

Hamed Saeidi Googarchin, Behzad Teimouri

Experimental and numerical investigation of crack growth in adhesive bonding of two composites plates under mode I

Pages 271-280

Amir Kariman Moghadam, Saeed Rahnama, Sattar Maleki

Simulation and strength and fatigue life improvement of adhesively bonded single lap joint using cohesive zone model with cyclic degrading

Pages 281-289

Mohammad Hassan Shojaeefard, Hamed Saeidi Googarchin, Mohammad Reza Gheybi, Mohammad Amin Nikkhah

Design and Simulation of a Broadband Sonar Transducer and the Experimental Validation

Pages 290-296

Amin Yousefi, Mohammad Mahdi Abootorabi Zarchi

On fracture analysis of exploded pressure vessels and pipes

Pages 297-302

Majid Mirzaei, Saharnaz Tavakoli

Experimental investigation on aerodynamic coefficients of a flying wing aircraft with different leading edge sweep angle

Pages 303-311

Mojtaba Dehghan Menshadi, Mehdi Eilbeigi, Mehrdad Bazaz zadeh, Mohammad Ali Vaziry

Numerical Simulation to improve underground room and pillar coal mine ventilation using stoppings and brattice

Pages 312-320

Ghassem Heidarinejad, Pedram Pakzad

Modeling of bubble growth behavior in the PS/CO2 batch foaming system using finite element method

Pages 321-328

Mostafa Salehi, Mahdi Salami Hosseini, Mostafa Rezaei

Experimental and Numerical Analysis of Fracture on Flexible Roll Forming Process of channel section in Aluminum 6061-T6 sheet

Pages 329-338

Yaghoub Dadgar Asl, Mohammad Morad Sheikhi, Ali Pourkamali Anaraki, Vali ollah Panahizadeh Rahimloo, Mohammad Hosseinpour Gollo

A finite element study on the effect of the partial flexibility of the stent strut on hemodynamic parameters affecting the restenosis risk in the coronary stent deployment site

Pages 339-347

Hamed Afrasiab, Bahereh Kordrostami

The effect of journal vibration on the hydrodynamic pressure profile in a plain journal bearing

Pages 349-356

Mohammad Hosseini, Hossein Abyar

Tow-Dimensional Investigation of Solitary Wave Propagating over a Submerged Vertical Thin Plate with PIV Technique

Pages 357-366

Mohammad Reza Tavakoli, Reza Zaghian, Mehran Karbasipour, Mahdi Nili

Numerical Study on Formation of Liquid Flow Emerging from a Capillary Emitter due to Electric Potential Effects

Pages 367-378

Hadi Dastourani, Mohammad Reza Jahannama, Abdollah Eslami Majd

Multiobjective Evolutionary Optimization of Turbofan Engine Min-Max Fuel Control Algorithm

Pages 379-388

Morteza Montazeri, Saied Mikhchin, Ali Rasti

Production of superhydrophobic copper surfaces by fabricating micro-nano features using wet etching process

Pages 389-395

Behnam Ahmadi, Hamid Reza Talesh Bahrami, Hamid Saffari

Performance analysis of single and couple radiant heaters under asymmetric flow field for providing uniform conditions in an industrial environment

Pages 396-402

Mahtab Aminzadeh, Ali Safavinejad, Seyed Alireza Zolfaghari

Journal Archive

Volume 26 (2026)

Volume 25 (2025)

Volume 24 (2024)

Volume 23 (2023)

Volume 22 (2022)

Volume 21 (2021)

Volume 20 (2020)

Volume 19 (2019)

Volume 18 (2018)

Volume 17 (2017)

Volume 16 (2016)

Volume 15 (2015)

Volume 14 (2014)

Volume 13 (2013)

Volume 12 (2012)

Volume 11 (2011)

Volume 10 (2010)

Volume 9 (2009)

Volume 8 (2008)

Volume 7 (2007)

Volume 6 (2006)

Volume 1 (2001)