Modares Mechanical Engineering

Volume & Issue: Volume 15, Issue 1, March 2015

Number of Articles: 48

Index

Control of pneumatic servo system based on simultaneous pressure observing on both sides of the cylinder by high-Gain observer

Pages 1-10

sepehr ramezani, Seyed Mehdi Rezaei, Mohammad Zareinejad, Kevani Baghestan

Studying the performance of multi-layered ceramic-epoxy armor under high velocity ballistic impact with finite element method

Pages 11-20

Mojtaba Yazdani, Ali Rashed

Geometrical and physical parameters affecting free vibration and impact force of sandwich plate with Smart Flexible cores

Pages 21-30

Gholamhasan Payghaneh, karamat malekzadeh fard, fahimeh rashed saghavaz

Experimental Study and finite element simulation of Cylindrical-conical-cylindrical horns with Circular cross-section:Application on ultrasonic vibrations Sliding friction process

Pages 31-38

davoud shahgholian ghahfarokhi, Mahmoud Salimi, mahmoud farzin

Study of inhibition of AÎ²42 aggregation and oligomer forming with Docking and MD simulation

Pages 39-48

vahid khandan, bahar firoozabadi, Mohammad Said Saidi

Flutter analysis of an aircraft wing carrying, elastically, an external store

Pages 49-58

hamid pourshamsi, Abbas Mazidi, seyed ahmad fazelzadeh haghighi

Design and Modeling of an Active Hydraulic Engine Mount Using FXLMS Algorithm for Automotive Applications

Pages 59-66

Reza Tikani, Saeed Ziaei Rad, Nader Vahdati, Somayeh Heidari

Influence of composite materials nonlinearity on load distribution in single-column multi-bolt composite joints

Pages 67-74

Fathollah Taheri-Behrooz, Rouzbeh Nouhi, Ali Reza Shamaei Kashani

Investigation of energy absorption and deformation of thin walled tubes with circle and square section geometries under transverse impact loading

Pages 75-83

Mahdi Choubini, Gholam Hossein Liaghat, MohammadHossein Pol

Experimental study of surface roughness and burr width in micromilling of titanium alloy

Pages 84-90

hamed hassanpour, hamed Rezaei, Mohammad Hossein Sadeghi, amir rasti, mohamad mahdi hadavi

A model for the effective thermal conductivity of nanofluids â effect of interfacial layer and non-uniform size distribution of nanoparticles

Pages 91-98

Mohammad Moghiman, Zohreh Shams

Effects of regular and random distribution of silica nanoparticles on the thermo-elastic and viscoelastic properties of polymer nanocomposites- Micromechanics-based analysis

Pages 99-107

Reza Ansari, Mohammad Kazem Hassanzadeh

Analytical and experimental modeling of cutting force in plasma assisted turning of hardened steel

Pages 108-116

Masoud Farahnakian, Mohammad Reza Razfar, Farid Reza Biglari

Effect of Secondary Flow Injection Area on Thrust Vectoring Angle in Double Throat Nozzles

Pages 117-125

Mehdi Jahromi, Hadi Hamedi, Mostafa Mahmoodi, Jamasb Pirkandi

The effect of pass numbers over microstructure and mechanical properties of magnesium alloy of AZ31C in the tubular channel angular pressing (TCAP) at temperature of 300 Â°C

Pages 126-130

Abdulrahman Soufi Mohammadi, Mahmoud Mosavi Mashhadi, Ghader Faraji

Investigation of energy harvesting from vibrating nonlinear Timoshenko beam under base oscillating with electromagnetic energy harvester

Pages 131-140

Behzad Janizadeh, Morteza Dardel, Mohammad Hadi Pashaei, Reza Akbari Alashti

The Effect of Advanced BBC2003, Yld2004 and BBC2008 Yield Criteria on FLDs Based on M-K, Swift's and Hill's Models

Pages 141-150

Mohammad Hossein Pour, S.M. Hossein Seyedkashi, Sepideh Shahi

Slip compensation of grasped objects in robot gripper

Pages 151-162

Habib Ahmadi, Hanieh Esmaeeli, Mohammad Mehdi Fateh

Numerical investigation of magnus wind turbine new blade section performance

Pages 163-172

Seyed Ali Kazemi, Mahdi Nili Ahmadabadi, Ahmad Sedaghat, Mohsen Saghafian

Analysis of the passengers effect on chaotic vibrations of a nonlinear full vehicle model

Pages 173-184

Javad Fakhraee, Heshmatallah Mohammad Khanlo, Mostafa Ghayour

Experimental investigation of quasi-static perforation on laminated glass epoxy composites by indenters with different geometries

Pages 185-193

Erfan Mehrabani Yeganeh, Gholam Hossein Liaghat, Mohammad Hossein Pol

Evaluating the effects of layer arrangement of a porous clothing on heat and mass transfer from the body under cold conditions

Pages 194-202

Hassan Hassanzadeh, Seyed Alireza Zolfaghari, Hossein Shariati

Experimental investigation of force convection heat transfer in porous channel with internal heat generation

Pages 203-210

meysam nazari, Davood JalaliVahid, samira khanjani

Thermo Elasto-Plastic analysis of functionally graded thick-walled cylindrical shells based on Prandtl-Reuss flow rule

Pages 211-218

Fatemeh Farhatnia, Mahsa Ghanbari

Experimental and numerical investigation of the maximum deflection of circular aluminum plate subjected to free air explosion

Pages 219-226

Jamal Zamani, Mohsen Goudarzi

Point clouds curvature estimation using umbrella curvature

Pages 227-235

khalili khalili, Abolfazel Foorginejad

Optimal Parameter Estimation of Ultrasonic Signals by Using a Combination of Particle Swarm Optimization and Gauss-Newton Algorithms

Pages 236-244

Ali Gholami, Farhang Honarvar, Hamid Abrishami Moghadam

Optimization of Surface roughness in stereolithography

Pages 245-256

Seyed Javad Aaraj Khodaii, Abdolreza Rahimi

Reliability Assessment of Multi-State System Based-On Fault Tree Analysis

Pages 257-266

mohammad ali farsi, Mohammad Najafi

Investigation of stress field around circular tunnels with concrete lining using complex potential functions

Pages 267-276

Alireza Kargar, Reza Rahmannejad, Mohammad Ali Haja Abasi

Investigating the domain length for simulation of gaseous detonation

Pages 277-284

Saeed Parvar, Kiumars Mazaheri

A nonlinear study on transient vibration and limit cycle oscillation of composite sandwich plates with electrorheological fluid layer

Pages 285-293

Jalil Rezaeepazhand, Jafar Rahiminasab

Dynamic Modeling and simulation of nano particle motion in different environments using AFM nano ârobot

Pages 294-300

Amin Habibnejad Korayem, Moein Taheri, Moharam Habibnejad Korayem

A methodology for positioning of holes in extrusion with multi-hole flat-faced dies to minimize exit profiles distortion

Pages 301-309

Sina Nazari Onlaghi, Ahmad Assempour

Effect of different geometrical parameters of atomic force microscope cantilevers in critical force and time based on manipulation with applying EFAST sensitivity analyses

Pages 310-316

Moharam Habibnejad Korayem, Sepehr Dehghani Ghahnaviyeh, Mehdi Ghasemi, Moein Taheri

Lubrication enhancement in deep drawing process by utilizing nanoparticle additives

Pages 317-322

Behrooz Zareh-Dsari, Mohammad Abaszadeh, Behnam Davoodi

Experimental Investigation of dissimilarity between heat transfer and momentum transfer in a distributed boundary layer using design of experiments method

Pages 323-331

Ghodrat Ghassabi, Mohsen Kahrom

Proper locus for mounting strain gage around cold worked hole for residual stress determination

Pages 332-338

Ehsan Pooladi Borj, Khalil Farhangdoost

Configuration design and layout optimization in GEO satellite

Pages 339-351

mahdi fakoor, Marziye Taghinnezhad, Amir Reza Kosari

A new inverse method for determination of unidirectional ply mechanical properties of a laminated composite

Pages 352-360

Mahmood Mehrdad Shokrieh, Reza Madoliat, Bahador Bostani, Ahmad Ghasemi, Vahid Mohmoodian

Determination of a general close form relation for crack density and induced delamination evolution in cross ply laminates under uniaxial loading condition based on an extended shear lag model

Pages 361-370

amin farrokhabadi, Maryam Aghaebrahimi

Experimental Investigation of Expanded Metal Tube Absorbers under Axial Impact Loading

Pages 371-378

mohammad damghani noori, Hossein Hatami, Ali Ghodsbin Jahromi

Numerical study of magnetic fields effects on the electrical conducting non-Newtonian ferrofluid flow through a vertical channel

Pages 379-389

Mousa Mohammadpourfard

Comparison of the Effect of Different Yield loci to Prediction of Ti64 Titanium Alloy Forming Limit Diagram

Pages 390-396

Ali Akbar Allahdadian, Kourosh Hasanpour

Investigation of annealing treatment on the mechanical and metallurgical properties of explosive-welded Al/St/Al multilayer

Pages 397-402

Mahdi Pourjafari Kasmaee, mohammad honarpishe

Numerical Investigation of Water/ãAlã_2 O_3 Nanofluid Forced Convective Boiling flow in a Vertical Channel

Pages 403-411

ataollah rabiee, Alireza Atf

Calibration of Weibull Parameters of Local Approach to Fracture by Using Experimental Cleavage Fracture data of Three Point Bending Specimens

Pages 412-418

Ahmad Mohammadi Najafabadi, Iraj Sattarifar, Mohsen Rezaeian

Journal Archive

Volume 26 (2026)

Volume 25 (2025)

Volume 24 (2024)

Volume 23 (2023)

Volume 22 (2022)

Volume 21 (2021)

Volume 20 (2020)

Volume 19 (2019)

Volume 18 (2018)

Volume 17 (2017)

Volume 16 (2016)

Volume 15 (2015)

Volume 14 (2014)

Volume 13 (2013)

Volume 12 (2012)

Volume 11 (2011)

Volume 10 (2010)

Volume 9 (2009)

Volume 8 (2008)

Volume 7 (2007)

Volume 6 (2006)

Volume 1 (2001)